China brown fused alumina Manufacturers Factory Suppliers
Bimodal Alumina Micro PowderBimodal Alumina Micropowder is produced using low-sodium alumina as the main raw material without any additives. It is calcined at a high temperature of 1300–1500℃ in a tunnel kiln, then ground byAdd to Inquiry
Alumina Powder for Refractory MaterialsHigh-temperature calcined alumina powder is produced using industrial alumina as raw material, calcined in a high-temperature tunnel kiln at an appropriate temperature to obtain stable α-aluminaAdd to Inquiry
Alumina Powder for CeramicsAlumina powder for ceramics (Al₂O₃) is insoluble in water and difficult to dissolve in acid or alkali solutions. It is calcined in a tunnel kiln at high temperature with long holding time and highAdd to Inquiry
Alumina for Thermal Conductive FillerAlumina for Thermal Conductivity Fillers (Al₂O₃) is an inorganic powder dominated by α-phase crystal form, featuring high purity, high thermal conductivity and electrical insulation. It has aAdd to Inquiry
Alumina Powder for Lithium Battery SeparatorsAlumina for Lithium-Ion Battery Separators is a high-performance alumina powder produced through specialized processing techniques according to the performance requirements of batteries and batteryAdd to Inquiry
Nano AluminaNano-alumina is a high-purity ultrafine alumina powder with a particle size ranging from 1 to 100 nm, mainly existing in γ-alumina or α-alumina crystal form. It is a nano-scale inorganic functionalAdd to Inquiry
Applicable Surfaces: The brown fused alumina sand can be used to and etch all types of surfaces including glass, granite, marble, ceramics and steel etc. Good Performance: Long duration and incisive...
Brown Fused Aluminum Oxide(also named brown fused alumina,brown corundum)is fused in an electrical arc furnace from a mixture of bauxite,coal scrap iron at high temperature.It shows brown color and...
FEPA (Federation of European Producers of Abrasives) Washington Mills has created a particle size conversion chart to assist our customers in selecting the correct grit size based on millimeters,...
Brown Fused Alumina is a tough, sharp abrasives which is highly suitable for grinding metals of high tensile strength. Its thermal properties make it an excellent material for use in the manufacture...
Brown aluminum oxide; brown fused aluminum oxide; News; Contact; Filter. Showing 1–12 of 16 results. Sale! ......
Brown fused alumina is made of bauxite and coke ( anthracite ) as main raw materials smelted at 2300℃ in a dumping furnace. Its main chemical components are Al2O3 and TiO2,and it also contains a...




